Netra1290自检失败

ching00086

lom>showchs -b
Component           Status   
---------------     --------  
/N0/RP0             Suspect   
/N0/RP2             Suspect   
/N0/SB2             Suspect   
lom>poweron
/N0/PS0: already on
/N0/PS1: already on
/N0/PS2: already on
/N0/PS3: already on
Powering boards on ...
Wed Nov 04 02:25:32 webserver lom: Attempt to power up /N0/SB2 failed: /N0/SB2 3.3V DC failed, observed: 0.49 volts
Wed Nov 04 02:25:32 webserver lom: sun.serengeti.HpuFailedException: CPU Board V3 at /N0/SB2
Wed Nov 04 02:25:32 webserver lom: sun.serengeti.CommException
Testing CPU Boards ...
Wed Nov 04 02:25:32 webserver lom: No usable Cpu board in domain

Component   Compatible Version               
---------   ---------- -------               
SSC1        Reference  5.20.17 Build_01      
/N0/IB6     Yes        5.20.17 Build_01      
/N0/SB2     -          No board power         

lom>showcomponent -v

/N0/SB2: is not powered on
Skipping /N0/SB2

Component           Status   Pending  POST   Description
---------           ------   -------  ----   -----------
/N0/IB6/P0          enabled  -        untest IO Controller 0
/N0/IB6/P1          enabled  -        untest IO Controller 1
/N0/IB6/P0/B0       enabled  -        untest 66/33MHz. EPCI/PCI Bus
/N0/IB6/P0/B1       enabled  -        untest 33MHz PCI Bus
/N0/IB6/P1/B0       enabled  -        untest 66/33MHz. EPCI/PCI Bus
/N0/IB6/P1/B1       enabled  -        untest 66/33MHz. EPCI/PCI Bus
/N0/IB6/P1/B0/C0    enabled  -        untest 66/33MHz. 3.3V Short PCI card
/N0/IB6/P1/B0/C1    enabled  -        untest 66/33MHz. 3.3V Short PCI card
/N0/IB6/P1/B1/C2    enabled  -        untest 66/33MHz. 3.3V Short PCI card
/N0/IB6/P1/B1/C3    enabled  -        untest 66/33MHz. 3.3V Short PCI card
/N0/IB6/P0/B0/C4    enabled  -        untest 66/33MHz. 3.3V Short PCI card
/N0/IB6/P0/B0/C5    enabled  -        untest 66/33MHz. 3.3V Short PCI card
/N0/RP0/            enabled  -        -      Repeater Board Slot 10
/N0/RP2/            enabled  -        -      Repeater Board Slot 12

ching00086

请帮忙看看PR板和SB2板是否已故障，多谢

ching00086

lom>showlogs -v

Wed Nov 04 01:03:41 webserver lom: [ID 143789 local0.notice] Boot: ScApp 5.20.17, RTOS 49
Wed Nov 04 01:03:42 webserver lom: [ID 385558 local0.notice] A power failure occured prior to this boot
Wed Nov 04 01:03:43 webserver lom: [ID 499787 local0.notice] SBBC Reset Reason(s): Power On Reset
Wed Nov 04 01:03:43 webserver lom: [ID 192252 local0.notice] Initializing the SC SRAM
Wed Nov 04 01:03:50 webserver lom: [ID 390645 local0.notice] Caching ID information
Wed Nov 04 01:03:51 webserver lom: [ID 532339 local0.notice] Clock Source: 75MHz
Wed Nov 04 01:03:55 webserver lom: [ID 641509 local0.notice] /N0/PS0: Status is OK
Wed Nov 04 01:03:56 webserver lom: [ID 251798 local0.notice] /N0/PS1: Status is OK
Wed Nov 04 01:03:57 webserver lom: [ID 762068 local0.notice] /N0/PS2: Status is OK
Wed Nov 04 01:03:57 webserver lom: [ID 372357 local0.notice] /N0/PS3: Status is OK
Wed Nov 04 01:03:57 webserver lom: [ID 515227 local0.notice] Chassis is in single partition mode.
Wed Nov 04 01:04:01 webserver lom: [ID 881026 local0.warning] NOTICE: /N0/FT0 is powered off
Wed Nov 04 01:04:02 webserver lom: [ID 596054 local0.notice] Cold boot detected: recovering active domains
Wed Nov 04 01:04:03 webserver lom: [ID 271982 local0.notice] SysEvent 5 /N0/PS0, power state, On (5,1)
Wed Nov 04 01:04:08 webserver lom: [ID 101882 local0.notice] /N0/SB2, hotplug status, SB2, module inserted (9,17)
Wed Nov 04 01:04:09 webserver lom: [ID 859911 local0.notice] /N0/IB6, hotplug status, IB6, module inserted (9,17)
Wed Nov 04 01:04:09 webserver lom: [ID 583713 local0.notice] /N0/RP0, hotplug status, RP0, module inserted (9,17)
Wed Nov 04 01:04:09 webserver lom: [ID 584226 local0.notice] /N0/RP2, hotplug status, RP2, module inserted (9,17)
Wed Nov 04 01:04:09 webserver lom: [ID 280174 local0.notice] SysEvent 5 /N0/PS1, power state, On (5,1)
Wed Nov 04 01:04:10 webserver lom: [ID 288366 local0.notice] SysEvent 5 /N0/PS2, power state, On (5,1)
Wed Nov 04 01:04:12 webserver lom: [ID 296558 local0.notice] SysEvent 5 /N0/PS3, power state, On (5,1)
Wed Nov 04 01:04:27 webserver lom: [ID 883136 local0.notice] ScApp: Initiating keyswitch: on, domain A.
Wed Nov 04 01:04:28 webserver lom: [ID 883136 local0.notice] ScApp: Initiating keyswitch: on, domain A.
Wed Nov 04 01:04:28 webserver lom: [ID 375814 local0.notice] /N0/FT0, fan speed, Low (4,1)
Wed Nov 04 01:04:38 webserver lom: [ID 375814 local0.notice] /N0/FT0, fan speed, Low (4,1)
Wed Nov 04 01:58:42 webserver lom: [ID 873385 local0.notice] Main, up 0 days 00:55:07, Memory 8,581,056
Wed Nov 04 02:17:44 webserver lom: [ID 920266 local0.crit] ErrorMonitor: Domain A has a SYSTEM ERROR
Wed Nov 04 02:17:44 webserver lom: [ID 920266 local0.crit] ErrorMonitor: Domain A has a SYSTEM ERROR
Wed Nov 04 02:17:44 webserver lom: [ID 665593 local0.error] Device voltage problem: /N0/SB2 abnormal state for device: Board 0 3.3 VDC 0 Value: 0.47 Volts DC
Wed Nov 04 02:17:44 webserver lom: [ID 584898 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.FailedHwException: (SdcAsic)Asic.getTemp: Path broken between CBH and SDC: SB2.sdc.10 (12400010)
Wed Nov 04 02:17:44 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:44 webserver lom: [ID 909312 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.FailedHwException: (ArAsic)Asic.getTemp: Path broken between CBH and SDC: SB2.ar.10 (12480010)
Wed Nov 04 02:17:44 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:44 webserver lom: [ID 571222 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.FailedHwException: /SB2/dx0: DxAsic.getTemp: sun.serengeti.jtag.JtagException: JtagController.tapWait:  Path broken between CBH and SDC: SB2.sdc.b0 (124000b0)
Wed Nov 04 02:17:44 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:44 webserver lom: [ID 702294 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.FailedHwException: /SB2/dx1: DxAsic.getTemp: sun.serengeti.jtag.JtagException: JtagController.tapWait:  Path broken between CBH and SDC: SB2.sdc.b0 (124000b0)
Wed Nov 04 02:17:45 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:45 webserver lom: [ID 833366 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.FailedHwException: /SB2/dx2: DxAsic.getTemp: sun.serengeti.jtag.JtagException: JtagController.tapWait:  Path broken between CBH and SDC: SB2.sdc.b0 (124000b0)
Wed Nov 04 02:17:45 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:45 webserver lom: [ID 964438 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.FailedHwException: /SB2/dx3: DxAsic.getTemp: sun.serengeti.jtag.JtagException: JtagController.tapWait:  Path broken between CBH and SDC: SB2.sdc.b0 (124000b0)
Wed Nov 04 02:17:46 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:46 webserver lom: [ID 652493 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.FailedHwException: (RepeaterSbbcAsic)Asic.getTemp: Path broken between CBH and SDC: SB2.sbbc0.regs.10 (10800010)
Wed Nov 04 02:17:46 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:46 webserver lom: [ID 402605 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.FailedHwException: I2cComm.readCmd:  Path broken between CBH and SDC: SB2.sbbc0.regs.c0 (108000c0)
Wed Nov 04 02:17:46 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:46 webserver lom: [ID 402605 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.FailedHwException: I2cComm.readCmd:  Path broken between CBH and SDC: SB2.sbbc0.regs.c0 (108000c0)
Wed Nov 04 02:17:46 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:46 webserver lom: [ID 402605 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.FailedHwException: I2cComm.readCmd:  Path broken between CBH and SDC: SB2.sbbc0.regs.c0 (108000c0)
Wed Nov 04 02:17:46 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:46 webserver lom: [ID 652862 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.HpuFailedException: CpuVoltageA2D.getOutputVoltage: sun.serengeti.CommException: I2cComm.readCmd:  Path broken between CBH and SDC: SB2.sbbc0.regs.c0 (108000c0)
Wed Nov 04 02:17:47 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:47 webserver lom: [ID 402605 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.FailedHwException: I2cComm.readCmd:  Path broken between CBH and SDC: SB2.sbbc0.regs.c0 (108000c0)
Wed Nov 04 02:17:47 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:47 webserver lom: [ID 652862 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.HpuFailedException: CpuVoltageA2D.getOutputVoltage: sun.serengeti.CommException: I2cComm.readCmd:  Path broken between CBH and SDC: SB2.sbbc0.regs.c0 (108000c0)
Wed Nov 04 02:17:47 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:47 webserver lom: [ID 652659 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.FailedHwException: (RepeaterSbbcAsic)Asic.getTemp: Path broken between CBH and SDC: SB2.sbbc1.regs.10 (10a00010)
Wed Nov 04 02:17:48 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:48 webserver lom: [ID 402771 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.FailedHwException: I2cComm.readCmd:  Path broken between CBH and SDC: SB2.sbbc1.regs.c0 (10a000c0)
Wed Nov 04 02:17:49 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:49 webserver lom: [ID 402771 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.FailedHwException: I2cComm.readCmd:  Path broken between CBH and SDC: SB2.sbbc1.regs.c0 (10a000c0)
Wed Nov 04 02:17:49 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:49 webserver lom: [ID 402771 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.FailedHwException: I2cComm.readCmd:  Path broken between CBH and SDC: SB2.sbbc1.regs.c0 (10a000c0)
Wed Nov 04 02:17:49 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:49 webserver lom: [ID 653028 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.HpuFailedException: CpuVoltageA2D.getOutputVoltage: sun.serengeti.CommException: I2cComm.readCmd:  Path broken between CBH and SDC: SB2.sbbc1.regs.c0 (10a000c0)
Wed Nov 04 02:17:49 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:49 webserver lom: [ID 402771 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.FailedHwException: I2cComm.readCmd:  Path broken between CBH and SDC: SB2.sbbc1.regs.c0 (10a000c0)
Wed Nov 04 02:17:49 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:49 webserver lom: [ID 653028 local0.notice] CPU Board V3 at /N0/SB2 Device poll caused: sun.serengeti.HpuFailedException: CpuVoltageA2D.getOutputVoltage: sun.serengeti.CommException: I2cComm.readCmd:  Path broken between CBH and SDC: SB2.sbbc1.regs.c0 (10a000c0)
Wed Nov 04 02:17:50 webserver lom: [ID 336982 local0.notice] Device will not be polled
Wed Nov 04 02:17:50 webserver lom: [ID 892466 local0.error] /N0/RP2 encountered the first error
Wed Nov 04 02:17:50 webserver lom: [ID 410395 local0.notice] /N0/SB2, sensor status, outside acceptable limits (7,1,0x207020d00070000)
Wed Nov 04 02:17:50 webserver lom: [ID 288240 local0.error]
/RP2/ar0:
>>> SafariPortError2[0x220] : 0x00008001
                 AdrPErr [00:00] : 0x1 Address parity error
                      FE [15:15] : 0x1

Wed Nov 04 02:17:50 webserver lom: [ID 363143 local0.error]
>>> SafariPortError3[0x230] : 0x00008005
                 AdrPErr [00:00] : 0x1 Address parity error
                      FE [15:15] : 0x1
                 QUnfErr [02:02] : 0x1 Queue underflow error

Wed Nov 04 02:17:50 webserver lom: [ID 197878 local0.error]
Wed Nov 04 02:17:50 webserver lom: [ID 688907 local0.error] ArAsic reported first error on /N0/IB6
Wed Nov 04 02:17:51 webserver lom: [ID 926807 local0.error]
/IB6/ar0:
>>> L2CheckError[0x6150] : 0x00009e1e
             CMDVSyncErr [12:09] : 0xf Ports [9:6] command valid mismatched against internal expected command valid
             PreqSyncErr [04:01] : 0xf Ports [9:6] prereq mismatched against internal expected prereq
                      FE [15:15] : 0x1

Wed Nov 04 02:17:51 webserver lom: [ID 937773 local0.error] [AD] Event: N1290.ASIC.AR.ADR_PERR.104a3002
     CSN:  DomainID: A ADInfo: 1.SCAPP.20.17
     Time: Wed Nov 04 02:17:50 PST 2015
     FRU-List-Count: 2; FRU-PN: 5406679; FRU-SN: 008293; FRU-LOC: /N0/SB2
                        FRU-PN: 5411384; FRU-SN: 018413; FRU-LOC: /N0/RP2
     Recommended-Action: Service action required


Wed Nov 04 02:17:52 webserver lom: [ID 937773 local0.error] [AD] Event: N1290.ASIC.AR.ADR_PERR.104a3002
     CSN:  DomainID: A ADInfo: 1.SCAPP.20.17
     Time: Wed Nov 04 02:17:50 PST 2015
     FRU-List-Count: 2; FRU-PN: 5406679; FRU-SN: 008293; FRU-LOC: /N0/SB2
                        FRU-PN: 5411384; FRU-SN: 018413; FRU-LOC: /N0/RP2
     Recommended-Action: Service action required


Wed Nov 04 02:17:52 webserver lom: [ID 764738 local0.crit] A fatal condition is detected on Domain A. Initiating automatic restoration for this domain.
Wed Nov 04 02:17:52 webserver lom: [ID 764738 local0.crit] A fatal condition is detected on Domain A. Initiating automatic restoration for this domain.
Wed Nov 04 02:17:52 webserver lom: [ID 711554 local0.error] Data Parity error polling failed. Board will no longer be polled: JtagController.tapWait:  Path broken between CBH and SDC: SB2.sdc.b0 (124000b0)
Wed Nov 04 02:18:48 webserver lom: [ID 273180 local0.notice] A: CycleKeyswitch: Initiating keyswitch: off, domain A.
Wed Nov 04 02:18:49 webserver lom: [ID 273180 local0.notice] A: CycleKeyswitch: Initiating keyswitch: off, domain A.
Wed Nov 04 02:18:49 webserver lom: [ID 358648 local0.error] Keyswitch.untestBoards: sun.serengeti.HpuFailedException: L1Hpu.setSyncPause: Path broken between CBH and SDC: SB2.ar.60 (12480060)
Wed Nov 04 02:18:51 webserver lom: [ID 844252 local0.error] Domain.unmaskErrors: sun.serengeti.HpuFailedException: DcdsAsic.enableErrors: sun.serengeti.jtag.JtagException: JtagController.tapWait:  No Board Power: SB2.sbbc0.regs.b0 (108000b0)
Wed Nov 04 02:18:53 webserver lom: [ID 135642 local0.error] Keyswitch.detachBoards: sun.serengeti.HpuFailedException: RepeaterHpu.setArbSync: sun.serengeti.FailedHwException: No Board Power: SB2.ar.60 (12480060)
Wed Nov 04 02:19:01 webserver lom: [ID 375814 local0.notice] /N0/FT0, fan speed, Low (4,1)
Wed Nov 04 02:19:04 webserver lom: [ID 123804 local0.notice] SysEvent 5 /N0/PS0, power state, Off (5,0)
Wed Nov 04 02:19:05 webserver lom: [ID 124060 local0.notice] SysEvent 5 /N0/PS1, power state, Off (5,0)
Wed Nov 04 02:19:05 webserver lom: [ID 124316 local0.notice] SysEvent 5 /N0/PS2, power state, Off (5,0)
Wed Nov 04 02:19:06 webserver lom: [ID 605643 local0.notice] /N0/FT0, fan speed, Off (4,0)
Wed Nov 04 02:19:07 webserver lom: [ID 324119 local0.warning] CAUTION: Physically removing the last power supply will cause the system to lose power.
Wed Nov 04 02:19:07 webserver lom: [ID 124572 local0.notice] SysEvent 5 /N0/PS3, power state, Off (5,0)
Wed Nov 04 02:19:10 webserver lom: [ID 271982 local0.notice] SysEvent 5 /N0/PS0, power state, On (5,1)
Wed Nov 04 02:19:11 webserver lom: [ID 280174 local0.notice] SysEvent 5 /N0/PS1, power state, On (5,1)
Wed Nov 04 02:19:12 webserver lom: [ID 288366 local0.notice] SysEvent 5 /N0/PS2, power state, On (5,1)
Wed Nov 04 02:19:13 webserver lom: [ID 296558 local0.notice] SysEvent 5 /N0/PS3, power state, On (5,1)
Wed Nov 04 02:19:28 webserver lom: [ID 504900 local0.notice] A: CycleKeyswitch: Initiating keyswitch: on, domain A.
Wed Nov 04 02:19:28 webserver lom: [ID 504900 local0.notice] A: CycleKeyswitch: Initiating keyswitch: on, domain A.
Wed Nov 04 02:19:28 webserver lom: [ID 375814 local0.notice] /N0/FT0, fan speed, Low (4,1)
Wed Nov 04 02:19:38 webserver lom: [ID 620402 local0.error] Attempt to power up /N0/SB2 failed: /N0/SB2 3.3V DC failed, observed: 0.47 volts
Wed Nov 04 02:19:38 webserver lom: [ID 503829 local0.error] sun.serengeti.HpuFailedException: CPU Board V3 at /N0/SB2
Wed Nov 04 02:19:38 webserver lom: [ID 889337 local0.notice] sun.serengeti.CommException
Wed Nov 04 02:19:43 webserver lom: [ID 304509 local0.error] No usable Cpu board in domain.
Wed Nov 04 02:19:44 webserver lom: [ID 477013 local0.error] Automatic reboot after system error failed
Wed Nov 04 02:19:44 webserver lom: [ID 477013 local0.error] Automatic reboot after system error failed

swallowcn

我们有个1280的机器，需要可以联系！
可拆配件！