我前些天刚好配了一次T3+,给你参考如下:
vo 和 v1是已做好的vol,每个vol为1.2T,做了lun后vol的数据都会丢了.:/:<1>volslice create s0 -z 591GB v0 -----生成591G的lun,一个es最多只能做16个slice
1 out of Max. 16 slices created, 15 available. :/:<2>volslice create s1 -z 591GB v0
2 out of Max. 16 slices created, 14 available. :/:<3>volslice create s2 -z 591GB v1
3 out of Max. 16 slices created, 13 available. :/:<4>volslice create s3 -z 591GB v1
4 out of Max. 16 slices created, 12 available. :/:<5>volslice list
Slice Slice Num Start Blk Size Blks Capacity Volume
s0 0 0 1239643776 591.107 GB v0
s1 1 1239643776 1239643776 591.107 GB v0
- - 2479287552 34944 0.016 GB v0
s2 2 0 1239643776 591.107 GB v1
s3 3 1239643776 1239643776 591.107 GB v1
- - 2479287552 34944 0.016 GB v1 :/:<6>lun perm list
lun slice WWN Group Name Group Perm WWN PermEffective Perm
--------------------------------------------------------------------------------------------------------
0 0 default -- -- nonenone
1 1 default -- -- nonenone
2 2 default -- -- nonenone
3 3 default -- -- nonenone
-------------------------------------------------------------------------------------------------------- :/:<8>lun default all_lun rw -----必须要设所有的lun为rw
:/:<9>lun perm list
lun slice WWN Group Name Group Perm WWN PermEffective Perm
--------------------------------------------------------------------------------------------------------
0 0 default -- -- rwrw
1 1 default -- -- rwrw
2 2 default -- -- rwrw
3 3 default -- -- rwrw
-------------------------------------------------------------------------------------------------------- :/:<10>port listmap port targetid addr_type lun volume owner access
u1p1 1 hard 0 v0 u1 primary
u1p1 1 hard 1 v0 u1 primary
u1p1 1 hard 2 v1 u2 failover
u1p1 1 hard 3 v1 u2 failover
u2p1 2 hard 0 v0 u1 failover
u2p1 2 hard 1 v0 u1 failover
u2p1 2 hard 2 v1 u2 primary
u2p1 2 hard 3 v1 u2 primary :/:<11>sys mp_support rw :/:<12>sys enable_volslice on :/:<13>sys list
blocksize : 32k
cache : auto
mirror : auto
mp_support : rw
naca : off
rd_ahead : on
recon_rate : med
sys memsize : 128 MBytes
cache memsize : 1024 MBytes
enable_volslice : on
fc_topology : loop
|
