|
vicolan |
发表于： 2002/04/09 09:47am
|
| 你可以把你机器现在的情况写一下吗？IP之类的 |
| |
|
loadysy |
发表于： 2002/04/09 09:50am
|
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
-------------------- -------------------- ----- ----- ------ ---------
172.22.6.0 202.107.117.2 UGH 1 0
202.107.117.0 202.107.117.28 U 1 6915 hme0
202.107.117.0 202.107.117.27 U 1 0 hme0:2
202.107.117.0 202.107.117.26 U 1 0 hme0:3
202.112.29.0 202.107.117.2 UG 1 3699
192.168.0.0 202.107.117.2 UG 1 479140
202.118.0.0 202.107.117.2 UG 1 73554
224.0.0.0 202.107.117.28 U 1 0 hme0
default 202.107.117.1 UG 1 248363
127.0.0.1 127.0.0.1 UH 4562740589 lo0
ifconfig -a
hme0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 1
inet 202.107.117.28 netmask ffffffe0 broadcast 202.107.117.31
ether 8:0:20:e5:c8:59
hme0:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 1
inet 202.107.117.27 netmask ffffffe0 broadcast 202.107.117.31
hme0:3: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 1
inet 202.107.117.26 netmask ffffffe0 broadcast 202.107.117.31
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 2
inet 127.0.0.1 netmask ff000000
快帮我看看，谢谢啦~ |
| |
|
Sun1000 |
发表于： 2002/04/09 10:19am
|
| GH,说明172.22.6.0是网段, 又是一个host,?? |
| |
|
loadysy |
发表于： 2002/04/09 10:23am
|
| 我只执行了route add 172.22.6.0 202.107.117.2这一条，它默认就出来UGH,我觉得应该是UG呀，快帮帮我啊~~！！！ |
| |
|
Sun1000 |
发表于： 2002/04/09 10:29am
|
route add net 172.22.6.0 202.107.117.2
应该指明net 目标网段吧 |
| |
|
loadysy |
发表于： 2002/04/09 10:46am
|
| ok,非常感谢~！不过也是有点奇怪，虽然好使了，其他的路由都是像上面的那条命令那么加的，为什么单单这条需要指定net呢？ |
| |
|
Sun1000 |
发表于： 2002/04/09 10:52am
|
| 不会吧,大姐,应该要指明的吧, |
| |
|
loadysy |
发表于： 2002/04/09 10:59am
|
大兄弟啊~~我没说谎,真的!呵呵~~
我刚刚设完,route add 192.168.0.0 202.107.117.2
route add -net 172.22.6.0 202.107.117.2
i do not know why |
| |
|
dqiu |
发表于： 2002/04/09 11:05am
|
| net表示网段,host表示主机啊.solaris需要指名的. |
| |
|
bjchenxu |
发表于： 2002/10/11 01:33pm
|
| 你这个是有点怪，一般不需要指明的 |
| |
|
|
