本文参照网友的文章！请各位指正！！！
首先下载源码
proftpd1.2.7:
ftp://ftp.proftpd.org/distrib/source/proftpd-1.2.7.tar.bz2
http://www.castaglia.org/proftpd/mod_quotatab-1.2.4.tar.gz
安装mysql 这一部分参看，apache+mysql+mysql的安装过程
开始编译安装
将proftpd的源码包解压缩到某临时目录下：
# bunzip2 proftpd-1.2.7.tar.bz2
# tar -xvf proftpd-1.2.7.tar
# gunzip proftpd-mod-quotatab-1.2.4.tar.gz
# tar -xvf proftpd-mod-quotatab-1.2.4.tar
# cd mod_quotatab
# cp * ../proftpd-1.2.7/modules //把这个目录中的文件拷proftpd中的modules 目录中
# cd ../proftpd-1.2.7/contrib
#vi mod_sql_mysql.c
修改#include <mysql/mysql.h>;根据你的mysql 安装在哪里来决定：
#include </usr/local/mysql/include/mysql/mysql.h>;
# cd ~/porftpd-1.2.7]
#./configure --prefix=/usr/local/proftpd \
--with-modules=mod_sql:mod_sql_mysql:mod_quotatab:mod_quotatab_sql \
--with-includes=/usr/local/mysql/include/mysql \ // mysql 的includes 目录
--with-libraries=/usr/local/mysql/lib/mysql // mysql 的lib 目录
# make
# make install
将/etc/passwd 和group 拷贝到/usr/local/proftpd/etc下
并修成如下样子：
proftpd/etc/passwd
root:x:0:1:Super-User:/:/sbin/sh
daemon:x:1:1::/:
uucp:x:5:5:uucp Admin:/usr/lib/uucp:
FTPUSR:x:1000:1000::/ftp:/bin/sh
proftpd/etc/group
root::0:root
other::1:
uucp::5:root,uucp
FTPGRP::1000:
修改proftpd/etc/proftpd.conf 文件配置 (我的配置文件，这是基本的功能)
# This is a basic ProFTPD configuration file (rename it to
# 'proftpd.conf' for actual use. It establishes a single server
# and a single anonymous login. It assumes that you have a user/group
# "nobody" and "ftp" for normal operation and anon.
ServerName "WELCOME"
ServerType standalone
DefaultServer on
# Port 21 is the standard FTP port.
Port 21
# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask 022
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd).
MaxInstances 30
DefaultRoot ~
SystemLog /var/log/ftp.syslog
TransferLog /var/log/ftp.transferlog
MaxLoginAttempts 3
RateReadBPS 8000
RateWriteBPS 8000
QuotaDirectoryTally on
QuotaDisplayUnits Kb
QuotaEngine on
QuotaLog /var/ftp/Quota.log
QuotaShowQuotas on
<Global>;
SQLConnectInfo ftp@localhost:3306 root password
SQLAuthTypes Backend Plaintext
SQLUserInfo ftpusers userid passwd uid gid home shell
SQLGroupInfo ftpgrps groupname gid members
RequireValidShell off
SQLAuthenticate users
SQLHomedirOnDemand on
SQLNamedQuery get-quota-limit SELECT "name, quota_type, per_session, limit_type, bytes_in_avail, bytes_out_avail, bytes_xfer_avail, files_in_avail, files_out_avail, files_xfer_avail FROM quotalimits WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery get-quota-tally SELECT "name, quota_type, bytes_in_used, bytes_out_used, bytes_xfer_used, files_in_used, files_out_used, files_xfer_used FROM quotatallies WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, files_in_used = files_in_used + %{3}, files_out_used = files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name = '%{6}' AND quota_type = '%{7}'" quotatallies
SQLNamedQuery insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5}, %{6}, %{7}" quotatallies
QuotaLimitTable sql:/get-quota-limit
QuotaTallyTable sql:/get-quota-tally/update-quota-tally/insert-quota-tally
</Global>;
# Set the user and group under which the server will run.
User FTPUSR
Group FTPGRP
# Normally, we want files to be overwriteable.
<Directory />;
AllowOverwrite on
</Directory>;
# A basic anonymous configuration, no upload directories.
<Anonymous ~ftp>;
User ftp
Group ftp
# We want clients to be able to login with "anonymous" as well as "ftp"
UserAlias anonymous ftp
# Limit the maximum number of anonymous logins
MaxClients 10
# We want 'welcome.msg' displayed at login, and '.message' displayed
# in each newly chdired directory.
DisplayLogin welcome.msg
DisplayFirstChdir .message
# Limit WRITE everywhere in the anonymous chroot
<Limit WRITE>;
DenyAll
</Limit>;
</Anonymous>;
#具体设置MySQL认证的一些解释：
#数据库联接的信息，DatabaseName是数据库名， HostName是主机名，
#Port是端口号，UserName是连接数据库的用户名，Password是密码。
SQLConnectInfo DatabaseName@localhost:port root Password
#数据库认证的类型：
SQLAuthTypes Backend Plaintext
#指定用来做用户认证的表的有关信息。(需要在数据库中建立两张表用户和组"FTPUSERS""FTPGRPS"是数据表)
SQLUserInfo FTPUSERS userid passwd uid gid homedir shell
SQLGroupInfo FTPGRPS groupname gid members
#设置如果shell为空时允许用户登录：
RequireValidShell off
#数据库的鉴别
SQLAuthenticate users
#如果home目录不存在，则系统会为根据它的home项新建一个目录：
SQLHomedirOnDemand on
然后在这个数据库中建立一个用户表FTPUSERS，FTPGRPS：
#mysql –h localhost –u root –p 123
mysql>;create database FTP;
mysql>;use FTP;
create table FTPUSERS (
userid TEXT NOT NULL, // userid是用做FTP服务的用户名
passwd TEXT NOT NULL, // passwd是指此用户的密码
uid INT NOT NULL, // uid是系统用户的ID,(所映射的系统用户ID)
gid INT NOT NULL, // gid是所属系统组的ID
homedir TEXT, //用户的宿主目录
shell TEXT //指定用户所用的shell ，（在具体应用时为安全做的）
);
create table FTPGRPS (
grpname TEXT NOT NULL, //grpname是组的名称
gid SMALLINT NOT NULL, // gid是系统组的ID
members TEXT NOT NULL, // members是组的成员（多成员用逗号隔开）
);
插入记录：
INSERT INTO FTPUSERS (userid, passwd, uid, gid, home, shell)
values ('unixsr', '2219118', '1000', '1000', '/FTP/unixsr', '' );
增加用户时按此格式你可以插入。
INSERT INTO FTPGRPS VALUES ('FTPGRPS', 1000, 'FTPUSR');
每当增加用户后，一定要在mysql更新FTPGRPS这个表的成员值
做法：
mysql>;update FTPGRPS set members=’unixsr’,unixsr1,unixsr2’;
为FTP用户建立相应的系统用户。
# groupadd -g 1000 FTPGRP
# adduser -g 1000 FTPUSR
修改一下/etc/passwd
主要是把uid 和 gid 都改成1000 并把用户目录改为/FTP （我是手工改的，因为我的系统是三个硬盘做了一个RAID，挂到了/FTP 下，有命令的）
为FTPUSR建立HOME，unixsr 在此目录下：
mkdir /FTP/unixsr
chown FTPUSR /FTP/unixsr
chgrp FTPGRP /FTP/unixsr
当然在这里我仅做了一个用户，多个用户也是一样的，要注意目录属于系统的映射用户和组，
磁盘限额部分的一些解释：
#磁盘限额部分
QuotaDirectoryTally on
#磁盘限额单位 b"|"Kb"|"Mb"|"Gb"
QuotaDisplayUnits "Kb"
QuotaEngine on
#磁盘限额日志记录
QuotaLog /var/log/Quota.log
# 打开磁盘限额信息.
QuotaShowQuotas on
#以下是SQL调用语句，不用修改直接拷贝过去 (这一部分拷贝网友)
SQLNamedQuery get-quota-limit SELECT "name, quota_type, bytes_in_avail, bytes_out_avail, bytes_xfer_avail, files_in_avail, files_out_avail, files_xfer_avail FROM quotalimits \
WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery get-quota-tally SELECT "name, quota_type, bytes_in_used, bytes_out_used, \
bytes_xfer_used, files_in_used, files_out_used, files_xfer_used FROM quotatallies \
WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, \
bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, \
files_in_used = files_in_used + %{3}, files_out_used = files_out_used + %{4}, \
files_xfer_used = files_xfer_used + %{5} \
WHERE name = '%{6}' AND quota_type = '%{7}'" quotatallies
SQLNamedQuery insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5}, %{6}, %{7}" quotatallies
QuotaLimitTable sql:/get-quota-limit
QuotaTallyTable sql:/get-quota-tally/update-quota-tally/insert-quota-tally
然后建立mysql 数据表
CREATE TABLE quotalimits (
name VARCHAR(30),
quota_type ENUM("user", "group", "class", "all") NOT NULL, //磁盘限额的类型
bytes_in_avail FLOAT NOT NULL, //FTP用户空间容量
bytes_out_avail FLOAT NOT NULL, //从服务器上下载的限制
bytes_xfer_avail FLOAT NOT NULL, //传输的文件的流量控制
files_in_avail INT UNSIGNED NOT NULL, //总共能上传文件的数目
files_out_avail INT UNSIGNED NOT NULL, //能从服务器上下载文件的总数目
files_xfer_avail INT UNSIGNED NOT NULL //总共可传输文件的数目(上传和下载)
);
CREATE TABLE quotatallies (
name VARCHAR(30) NOT NULL,
quota_type ENUM("user", "group", "class", "all") NOT NULL,
bytes_in_used FLOAT NOT NULL,
bytes_out_used FLOAT NOT NULL,
bytes_xfer_used FLOAT NOT NULL,
files_in_used INT UNSIGNED NOT NULL,
files_out_used INT UNSIGNED NOT NULL,
files_xfer_used INT UNSIGNED NOT NULL
);
给 unixsr帐号给予1M空间，最多能上传10个文件到服务器上，文件传输流量为20M，只能传输1个文件。（我这样设置仅为了测试，要根据自己的情况设置）
mysql>;INSERT INTO `quotalimits` ( `name` , `quota_type` , `bytes_in_avail` , `bytes_out_avail` , `bytes_xfer_avail` , `files_in_avail` , `files_out_avail` , `files_xfer_avail` )
VALUES ('user1', 'user', '1024', '0', '2048000', '10', '0', '1');
注：不需要设置的部分用0代替就可以了
测试：
现在运行proftpd，登陆到unixsr ，使用quote SITE QUOTA 就会显示unixsr用户的磁盘使用情况
ftp>; quote SITE QUOTA
200-The current quota for this session are [current/limit]:
Name: unixsr
Quota Type: User
Uploaded Kb: 0.00/1.00
Downloaded Kb: unlimited
Transferred Kb: 0.00/2000.00
Uploaded files: 0/10
Downloaded files: unlimited
Transferred files: 0/1
200 Please contact root@localhost if these entries are inaccurate
这次实验，我还做一把apache+php同porftp一起用，效果还可以：
在apache中只需把目录指向ftp用户的宿主目录，并且在httpd.conf中一定要把user和guoup 指定为FTPUSR FTPGRP,否则没有权限。
以上这些是在：sun ultra 10 solaris 8 下完成的
所有的安装全部结束，我在这里特别感谢：螃蟹wind521,及其它的一些网友！我参照了chinaunix.net上的不少文章，并亲自实验！在这里特别感谢大家,请大家指正！
ncwangw 回复于：2003-05-31 17:12:45
还是用pureftpd吧，
proftpd性能差抛开不说，proftpd的quota磁盘限额根本就是有问题。
wwl 回复于：2003-05-31 17:37:56
是的在磙盘限额这块是有问题！我是一个newbie，所以什么都要做一做啊！
aloneflasher 回复于：2003-08-22 16:28:37
在安装过程中的问题
mod_sql.c: In function `_sql_getpasswd':
mod_sql.c:996: warning: int format, uid_t arg (arg 4)
mod_sql.c: In function `_sql_getgroup':
mod_sql.c:1188: warning: int format, gid_t arg (arg 4)
mod_sql.c: In function `cmd_uid_name':
mod_sql.c:2883: warning: int format, long int arg (arg 4)
mod_sql.c:2895: warning: int format, long int arg (arg 4)
mod_sql.c: In function `cmd_gid_name':
mod_sql.c:2927: warning: int format, long int arg (arg 4)
mod_sql.c:2939: warning: int format, long int arg (arg 4)
gcc -DSOLARIS2_8 -DSOLARIS2 -I.. -I../include -I/usr/local/mysql/include -O2 -Wall -c mod_sql_mysql.c
mod_sql_mysql.c: In function `_build_error':
mod_sql_mysql.c:333: warning: passing arg 4 of `mod_create_ret' discards qualifiers from pointer target type
srcdir=. ./glue.sh mod_core.o mod_xfer.o mod_auth_unix.o mod_auth_file.o mod_auth.o mod_ls.o mod_log.o mod_site.o mod_auth_pa
m.o mod_sql.o mod_sql_mysql.o
gcc -DSOLARIS2_8 -DSOLARIS2 -I.. -I../include -I/usr/local/mysql/include -O2 -Wall -c module_glue.c
gcc -Llib -o proftpd src/main.o src/timers.o src/sets.o src/pool.o src/regexp.o src/dirtree.o src/support.o src/inet.o src/l
og.o src/bindings.o src/scoreboard.o src/feat.o src/netio.o src/response.o src/ident.o src/data.o src/modules.o src/auth.o
src/fsio.o src/mkhome.o modules/mod_core.o modules/mod_xfer.o modules/mod_auth_unix.o modules/mod_auth_file.o modules/mod_au
th.o modules/mod_ls.o modules/mod_log.o modules/mod_site.o modules/mod_auth_pam.o modules/mod_sql_mysql.o modules/mod_sql.o
modules/module_glue.o -lsupp -lsocket -lnsl -lresolv -lm -lz -lmysqlclient -lpam -L/usr/local/mysql/lib/mysql
ld: fatal: library -lmysqlclient: not found
ld: fatal: File processing errors. No output written to proftpd
collect2: ld returned 1 exit status
*** Error code 1
make: Fatal error: Command failed for target `proftpd'
请大虾指教
wwl 回复于：2003-09-13 16:07:49
数据库安装有问题？请重新安装，在系统安装之后应先安装必要的工具包！make tar etc.
hsyll 回复于：2003-11-15 18:39:46
第一次安装mysql时用二进制方式安装，结果在安装proftp时出以下错误
ld: fatal: library -lmysqlclient: not found
ld: fatal: File processing errors. No output written to proftpd
collect2: ld returned 1 exit status
*** Error code 1
make: Fatal error: Command failed for target `proftpd'
用源码方式安装了mysql后就成功了!
|
