- 论坛徽章:
- 0
|
有台服务器,只运行了一个mysql
服务器配置两颗4核E5410 8G内存 146G sas 15k转速的硬盘
系统为centos 5.2 64位
mysql 5.1.32 64位
平均每秒约1w次查询,优化的还不错,性能很好,负载4左右也很稳定
加载了google的 tcmalloc
现在的问题是,不知道什么原因,内存貌似失控了。内存的使用率,跟配置的完全不是一回事,一般48小时内就能把8G内存耗光,估计4天左右又能把4G的swap空间耗光,用到swap的时候,性能并没有下降。然后,就内存溢出了,挺郁闷。
目前的内存使用情况
free -m
total used free shared buffers cached
Mem: 7982 6999 983 0 237 955
-/+ buffers/cache: 5806 2175
Swap: 4094 6 4087
预计3天以后就能把物理内存和swap都能耗光,然后溢出
主要的表都用的innodb引擎。不多废话,把配置文件贴出来,请高手们不吝赐教
# Example MySQL config file for very large systems.
#
# This is for a large system with memory of 1G-2G where the system runs mainly
# MySQL.
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is /usr/local/mysql/data) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.
# The following options will be passed to all MySQL clients
[client]
#password = your_password
port = 3306
socket = /tmp/mysql.sock
# Here follows entries for some specific programs
# The MySQL server
[mysqld]
port = 3306
bind-address=192.168.0.2
socket = /tmp/mysql.sock
skip-locking
key_buffer = 512M
max_allowed_packet = 1M
table_cache = 1024
sort_buffer_size = 2M
read_buffer_size = 2M
read_rnd_buffer_size = 8M
myisam_sort_buffer_size = 64M
thread_cache_size = 8
query_cache_size = 32M
# Try number of CPU's*2 for thread_concurrency
thread_concurrency = 16
set-variable=max_connections=1000
long_query_time = 1
log_slow_queries = /backup/logs/mysql/mysql-slow.log
max_heap_table_size = 500M
tmp_table_size = 200M
back_log=400
# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking
skip-name-resolve
# Disable Federated by default
skip-federated
# Replication Master Server (default)
# binary logging is required for replication
#log-bin=mysql-bin
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1
# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin
#
# binary logging format - mixed recommended
#binlog_format=mixed
# Point the following paths to different dedicated disks
#tmpdir = /tmp/
#log-update = /path-to-dedicated-directory/hostname
# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /usr/local/mysql/data/
#innodb_data_file_path = ibdata1:2000M;ibdata2:10M:autoextend
innodb_data_file_path = ibdata1:1500M;ibdata2:1500M;ibdata3:1500M;ibdata4:1500M;ibdata5:1500M:autoextend
#innodb_log_group_home_dir = /usr/local/mysql/data/
#innodb_log_arch_dir = /usr/local/mysql/data/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 3072M
innodb_additional_mem_pool_size = 20M
# Set .._log_file_size to 25 % of buffer pool size
innodb_log_file_size = 256M
innodb_log_buffer_size = 20M
innodb_flush_log_at_trx_commit = 2
innodb_thread_concurrency = 1000
innodb_flush_method = O_DIRECT
[mysqldump]
quick
max_allowed_packet = 16M
[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
[isamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M
[myisamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M
[mysqlhotcopy]
interactive-timeout
[ 本帖最后由 real_lufeng 于 2009-5-6 17:45 编辑 ] |
|