- 论坛徽章:
- 0
|
机器掉电后cluster就起不来了
想重新验证或重新配置,结果都报错..
# cmcheckconf -k -v -C /etc/cmcluster/cmclconf.ascii
Checking cluster file: /etc/cmcluster/cmclconf.ascii
Note : a NODE_TIMEOUT value of 2000000 was found in line 128. For a
significant portion of installations, a higher setting is more appropriate.
Refer to the comments in the cluster configuration ascii file or Serviceguard
manual for more information on this parameter.
Checking nodes ... Done
Checking existing configuration ... Unable to open communications to configuration daemon: I/O error
Unable to connect to configuration database.
cmcheckconf: Failed to get the existing cluster configuration.
# cmquerycl -v -C /etc/cmcluster/cmclconf.ascii -n host1 -n host2
Warning: Unable to determine local domain name for host1
Looking for other clusters ... Done
Gathering storage information
Unable to connect to node host1: I/O error
Unable to connect to node host2: I/O error
Gathering network information
Beginning network probing
Not probing node host1 as it is currently unreachable.
This may cause network partitions to be reported.
Not probing node host2 as it is currently unreachable.
This may cause network partitions to be reported.
Completed network probing
Failed to gather configuration information.
查看syslog,发现报
host1 cmclconfd[29372]: Unable to open /dev/urandom (No such dev
ice).
host1 cmclconfd[29372]: Error, tried to create a cmclconfd token with 64 bytes and only generated 0 bytes. |
|
免费注册
发表于 2007-06-02 00:31
