全部博文（2005）
分类：
2009-10-31 16:09:11
|
|
SAM-BA) comes with the . It allows to program flash media through RS232, USB or link.
SAM-BA only runs on Windows.
| Description | Binary | FAQ applicable |
|---|---|---|
SAM Boot Assistant (SAM-BA) on | for at91sam9xe (SAM-BA 2.8), for at91sam9g20 (SAM-BA 2.8), for at91sam9263 (SAM-BA 2.7) |
SAM-BA Linux uses the USB connexion through CDC usbserial driver to communicate with the device.
USB CDC Serial driver mount procedure :
rmmod usbserial
modprobe usbserial vendor=0x03eb product=0x6124
lsusb -d 03eb:6124
Bus 004 Device 006: ID 03eb:6124 Atmel Corp
dmesg
...
kernel: usb 4-2: new full speed USB device using uhci_hcd and address 5
kernel: usb 4-2: configuration #1 chosen from 1 choice
kernel: usbserial_generic 4-2:1.0: generic converter detected
kernel: usbserial_generic: probe of 4-2:1.0 failed with error -5
kernel: usbserial_generic 4-2:1.1: generic converter detected
kernel: usb 4-2: generic converter now attached to ttyUSBx
=> you will have to use /dev/ttyUSBx instead of \usb\ARM0 to connect to your board
You can also use
.tcl scripts from this flavor of SAM-BA. This is useful if you want to run demos.
| Description | Binary | FAQ applicable |
|---|---|---|
SAM Boot Assistant (SAM-BA 2.9) Linux port initiative using CDC | sam-ba_2.9_cdc_linux.zip | |
SAM Boot Assistant (SAM-BA 2.8) Linux port initiative using CDC | sam-ba_cdc_2.8.linux_01.zip | for at91sam9xe, for at91sam9g20 |
SAM Boot Assistant (SAM-BA 2.7) Linux port initiative using CDC | sam-ba_cdc_2.7.linux_01.zip | for at91sam9263 |
CodeSourcery provides regular, validated releases of the GNU Toolchain for arm processor.
This document refers to arm2007q1-10 version of CodeSourcery toolchain.
Features in this release include:
Links:
| Description | Binary |
|---|---|
| CodeSourcery GNU cross-toolchain for ARM |
The mkimage U-Boot tool is used to convert a standard kernel image into uImage format needed by U-Boot command.
| Description | Sources | Binary |
|---|---|---|
Pre-built static version of the u-boot mkimage tool | mkimage |
Not needed for newer .
Some newer version of make produce errors while compiling some older revision of . The compiling of this old code has been validated with make-3.80 : Take it and compile it on your host machine (pace in /usr/local directory for example). You can use it calling the right binary while issuing the cross-compile command:
/usr/local/bin/make-3.80 CROSS_COMPILE=
| Description | Sources | Binary |
|---|---|---|
Pre-built static version of the make tool |
| | , | 931.9 K | 16 Nov 2007 - 10:10 | |||
| | mkimage.bin | props, move | 460.7 K | 17 Jul 2007 - 13:11 |