独学而无友,则孤陋而寡闻!
| 标题 | 阅读 | 评论 | 转发 | 发布日期 | |
|---|---|---|---|---|---|
| PF笔记 | 1944 | 0 | 0 | 2011-01-29 | |
| 网卡流量状态:iftop | 2305 | 0 | 0 | 2011-01-13 | |
| 快速编译FreeBSD内核和安装网络下载的新内核 | 3478 | 0 | 0 | 2011-01-10 | |
| ipfw3 pipe more than 24000Kbit/s | 2660 | 2 | 0 | 2011-01-10 | |
| ipfw对于ip其它协议的写法 | 2602 | 0 | 0 | 2011-01-07 | |
| ipfw中pipe的怪异现象 | 1916 | 0 | 0 | 2011-01-05 | |
| FreeBSD下千兆双口数据包捕获的性能分析(SMP Kernel) | 3128 | 0 | 0 | 2010-12-22 | |
| FreeBSD7.1的fid说明 | 7521 | 0 | 0 | 2010-12-12 | |
| FreeBSD7.1的fib说明 | 1910 | 0 | 0 | 2010-12-12 | |
| FreeBSD7.1的fib(多路径路由)说明 | 1181 | 0 | 0 | 2010-12-12 | |
| FreeBSD下的mpd5小结 | 5566 | 1 | 0 | 2010-09-26 | |
| U盘安装openbsd | 4991 | 0 | 0 | 2010-09-06 | |
| OpenBSD与FreeBSD的不同 | 5581 | 0 | 0 | 2010-08-31 | |
| scp复制时的通配符 | 16279 | 0 | 0 | 2010-03-09 | |
| The FreeBSD GNOME Project | 1286 | 0 | 0 | 2010-03-05 | |
| BSD启动小结 | 1343 | 0 | 0 | 2010-01-24 | |
| freebsd+nginx+php+mysql+zend+phpmyadmin+系统优化(节选) | 1633 | 0 | 0 | 2010-01-21 | |
| missing pkg-descr错误 | 1865 | 0 | 0 | 2009-12-19 | |
| 双线实现标准 | 989 | 0 | 0 | 2009-06-10 | |
| PKGDIR和ports安装时"missing pkg-descr"的错误 | 2141 | 0 | 0 | 2009-02-10 |
adx1102011-06-18 19:43
superzjq2011-06-10 23:38
非常感谢老师的关注:)使用skipto可以解决这个问题
但还有点疑问,one_pass不是只跟nat和pipe有关吗,limit应该是属于动态规则吧 ?
在下不才 针对两种情况进行了测试
net.inet.ip.fw.one_pass = 0
# ipfw show
00100 9 529 allow ip from 192.168.1.0/24 to any in via em1 limit src-addr 100
00200 0 0 nat 1 ip from 192.168.1.0/24 to any out via em0
00300 0 0 nat 1 ip from any to me in via em0
00400 3 373 allow ip from any to any(用来匹配所有重新进入ipfw的数据包)
65535 0 0 deny ip from any to any
net.inet.ip.fw.one_pass = 1
# ipfw show
00100 8 480 allow ip from 192.168.1.0/24 to any in via em1 limit src-addr 100
00200 0 0 nat 1 ip from 192.168.1.0/24 to any out via em0
00300 0 0 nat 1 ip from any to me in via em0
00400 0 0 allow ip from any to 192.168.1.0/24 out via em1
65535 45 1262 deny ip from any to any
其中em0接外网,em1接内网,有没one_pass都一样,数据包一被limit匹配后就没了下文
只能跟skipto一起使用,不知道是不是BUG,还是说有哪些地方需要设置
我用的是FreeBSD 8.2,内核配置都是默认的 
superzjq2011-05-26 17:59
老师您好,能否帮我看下这段配置
ipfw add allow ip from 192.168.1.0/24 to any in via em1 limit src-addr 10
ipfw add nat 1 ip from 192.168.1.0/24 to any out via em0
ipfw add nat 1 ip from any to me in via em0
ipfw nat 1 config if em0 log
ipfw add allow ip from any to any
em0接外网,em1接内网,做了NAT,想限制每IP连接数,已经明确指定了方向和接口,但不知为何数据包被第一条limit匹配后就无法到达第二条的nat上了,去掉第一条的limit部分后则完全没有问题,实在是让我郁闷不已,望不吝赐教
