独学而无友,则孤陋而寡闻!
| 标题 | 阅读 | 评论 | 转发 | 发布日期 | |
|---|---|---|---|---|---|
| claroline追踪类分析 | 2031 | 0 | 0 | 2010-11-16 | |
| claroline中的时间设置 | 1974 | 0 | 0 | 2010-11-16 | |
| dede过长网址被截断的处理 | 1971 | 0 | 0 | 2010-11-09 | |
| Dedecms综合应用讲座 | 1353 | 0 | 0 | 2010-11-09 | |
| discuzX的常用全局变量 | 10470 | 0 | 0 | 2010-10-30 | |
| discuz门户模板笔记 | 3940 | 0 | 0 | 2010-10-30 | |
| claroline邮件系统附件设计 | 1233 | 0 | 0 | 2010-10-15 | |
| claroline内部邮件系统分析 | 1553 | 0 | 0 | 2010-10-15 | |
| claroline插入图片对话框过大的调整 | 1645 | 0 | 1 | 2010-10-13 | |
| supesite与hdwiki、Discuz整合注意事项 | 2073 | 0 | 0 | 2010-10-09 | |
| 在supesite中添加一个外部数据调用的频道 | 1335 | 0 | 0 | 2010-10-09 | |
| 解决DISCUZ7.2和supesite聚合设置,提示“论坛路径错误的方法” | 1159 | 0 | 0 | 2010-10-09 | |
| discuz的标签处理文件 | 977 | 0 | 0 | 2010-10-08 | |
| hdwiki数据表分析 | 1665 | 0 | 0 | 2010-10-04 | |
| discuz数据库分析 | 997 | 0 | 0 | 2010-10-04 | |
| moodle代码指南 | 3860 | 0 | 0 | 2010-08-18 | |
| Claroline常用全局函类和函数 | 2135 | 0 | 0 | 2010-08-10 | |
| WebGL | 2113 | 0 | 0 | 2010-08-06 | |
| 基于云的小组协作系统——Collabtive | 1375 | 0 | 0 | 2010-08-03 | |
| 帝国下载的make_password函数 | 1967 | 0 | 0 | 2010-07-30 |
adx1102011-06-18 19:43
superzjq2011-06-10 23:38
非常感谢老师的关注:)使用skipto可以解决这个问题
但还有点疑问,one_pass不是只跟nat和pipe有关吗,limit应该是属于动态规则吧 ?
在下不才 针对两种情况进行了测试
net.inet.ip.fw.one_pass = 0
# ipfw show
00100 9 529 allow ip from 192.168.1.0/24 to any in via em1 limit src-addr 100
00200 0 0 nat 1 ip from 192.168.1.0/24 to any out via em0
00300 0 0 nat 1 ip from any to me in via em0
00400 3 373 allow ip from any to any(用来匹配所有重新进入ipfw的数据包)
65535 0 0 deny ip from any to any
net.inet.ip.fw.one_pass = 1
# ipfw show
00100 8 480 allow ip from 192.168.1.0/24 to any in via em1 limit src-addr 100
00200 0 0 nat 1 ip from 192.168.1.0/24 to any out via em0
00300 0 0 nat 1 ip from any to me in via em0
00400 0 0 allow ip from any to 192.168.1.0/24 out via em1
65535 45 1262 deny ip from any to any
其中em0接外网,em1接内网,有没one_pass都一样,数据包一被limit匹配后就没了下文
只能跟skipto一起使用,不知道是不是BUG,还是说有哪些地方需要设置
我用的是FreeBSD 8.2,内核配置都是默认的 
superzjq2011-05-26 17:59
老师您好,能否帮我看下这段配置
ipfw add allow ip from 192.168.1.0/24 to any in via em1 limit src-addr 10
ipfw add nat 1 ip from 192.168.1.0/24 to any out via em0
ipfw add nat 1 ip from any to me in via em0
ipfw nat 1 config if em0 log
ipfw add allow ip from any to any
em0接外网,em1接内网,做了NAT,想限制每IP连接数,已经明确指定了方向和接口,但不知为何数据包被第一条limit匹配后就无法到达第二条的nat上了,去掉第一条的limit部分后则完全没有问题,实在是让我郁闷不已,望不吝赐教
