| 标题 | 阅读 | 评论 | 转发 | 发布日期 | |
|---|---|---|---|---|---|
| MTD | 740 | 0 | 0 | 2009-11-18 | |
| kernel 部分文件结构 | 763 | 0 | 0 | 2009-10-25 | |
| define | 1090 | 0 | 1 | 2009-10-21 | |
| 正则表达式 | 1125 | 0 | 0 | 2009-10-15 | |
| apt-get | 603 | 0 | 0 | 2009-10-11 | |
| 循环命令 | 932 | 0 | 0 | 2009-10-10 | |
| looping | 1683 | 0 | 0 | 2009-10-10 | |
| sudoer | 952 | 0 | 0 | 2009-10-09 | |
| 条件结构和流控制 | 816 | 0 | 0 | 2009-09-30 | |
| read declare let | 1653 | 0 | 0 | 2009-09-29 | |
| Makefile parameter | 1885 | 0 | 0 | 2009-09-29 | |
| SVN | 986 | 0 | 0 | 2009-09-22 | |
| 位置参量 | 940 | 0 | 0 | 2009-09-22 | |
| Shell sed | 920 | 0 | 0 | 2009-09-21 | |
| kernel 17 | 655 | 0 | 0 | 2009-09-16 | |
| kernel 1 | 672 | 0 | 0 | 2009-09-15 | |
| Makefile Running | 827 | 0 | 0 | 2009-09-09 | |
| Makefile Function | 770 | 0 | 0 | 2009-09-08 | |
| linux cmd--mount | 648 | 0 | 0 | 2009-09-02 | |
| Makefile If | 1177 | 0 | 0 | 2009-09-02 |
config20102009-11-19 20:15
外设fpga做的8k的memory，用arm9去读写它，在linux2.6系统下；这样做对吗？
实际地址映射到虚拟内存中，用得到的虚拟地址去读写。
地址总线：a1-a14 数据总线：d0-d15
#define FPGA_BASE_ADDR (0x18000000)//片选为nGCS3
#define BWSCON (0x48000000)
#define BANKCON3 (0x48000010)
#define IP_SIZE (0x1FFF)//13根地址线8K的物理空间
static void *bwscon,*bankcon3,*fpga_base_addr;
bwscon = ioremap_nocache(BWSCON,0x0000004);
bankcon3 = ioremap_nocache(BANKCON3,0x0000004);
fpga_base_addr = ioremap_nocache(FPGA_BASE_ADDR,IP_SIZE);
writel(readl(bwscon)|0xD000,bwscon);
writel(0x7FFC,bankcon3);
for(i=0;i
